Upset that your wireless can’t reach certain areas in your house? Powerline AV500 Power Line Wi-Fi Extender with PowerLine Adapter Kit is an ideal and simple solution for you. Edimax’s HP-5102Wn AV500 Powerline Wi-Fi Extender and HP-5102 AV500 Powerline adapter create a 500Mbps high-speed network with standard power outlets and converts wired Ethernet network and Powerline network into wireless which extends your internet access anytime anywhere in the house without internet dead spot and no more messy wires running through your house.
HP-5122WMK Powerline Wi-Fi Extender with Powerline Adapter kit is perfect for high-bandwidth applications like HD video and audio streaming, and it's compatible with any networking Ethernet-enable devices. HP-5102Wn expands your network to the locations wireless cannot, so it is ideal for computers, home theater, smart TVs and gaming devices. It provides you an expandable and easy to set up network at home.
Transmit Network Data via Existing Electrical Wires
The Edimax HP-5122WMK transforms the existing electrical wires in your home or office into a high-speed network. Complicated, disruptive and unsightly cabling is no longer necessary - if your home or office doesn’t have an existing Ethernet cable infrastructure, the HP-5122WMK enables you to create a network environment easily and cost-effectively.
Extend Your Home Network With High-Speed 300Mbps Wireless N Coverage
The HP-5102Wn is a 500Mbps Powerline adapter and a 300Mbps 802.11n wireless. Extend an Internet connection to any room via your home’s electrical circuit and create a high speed 802.11n wireless at any power socket. The HP-5102Wn offers easy, plug-and-play setup and provides super-fast Wi-Fi coverage – enough for even the most demanding applications, along with excellent range across large homes or through walls and floors. Ideal for keeping smart phones, tablets and laptops connected to high-speed Wi-Fi anywhere in your home.
Great for HD Video and Gaming
A perfect solution for bandwidth intensive applications such as online gaming or HD videos, the HP-5122WMK can provide users with a stable high-speed data transmission rates of up to 500Mbps over the existing electrical wires. IGMP mulitcast support ensures high-performance and efficient use of network resources for streaming high-definition video and digital audio quickly and easily.
User-Friendly Setup
Powerline adapters are designed with ease-of-use and user-friendliness in mind. There is no need to install any additional software and your Powerline network and be up-and-running within just a few minutes. A secure Powerline connection can be established between compatible devices with a simple touch of a button, with no configuration or passwords necessary.
Energy Saving
The HP-5122WMK supports the energy saving mode to reduce power consumption. If no data transmission or reception occurs over a certain period of time, the adapter will automatically go into standby mode to save power consumption.
APPLICATION DIAGRAM
*Powerline adapters must be deployed in sets of two or more.
HP-5122WMK includes 1 unit HP-5102Wn & 1 unit HP-5102
*500/200Mbps is the maximum theoretical communication speed at the physical layer via electric power lines (i.e. speed between Powerline devices) based on the IEEE 1901 standard.
SPECIFICATIONS (HP-5102Wn)
HARDWARE | |
Interface | 1 x AC plug 1 x RJ45 10/100Mbps LAN port |
LED Indicator | Power, Powerline, Ethernet, Wireless |
Button | 1 x Reset/Group button 1 x WPS button |
Antenna | 2 x Antenna (internal) |
Memory | 2MB Flash 8MB SDRAM |
Power Source | 100-240V AC, 50-60Hz |
Power Consumption | 4W |
Dimensions | 82 x 53 x 42mm (without plug) |
Weight | 125g |
NETWORK & SYSTEM | |
Standards | IEEE 802.11b/g/n IEEE 802.3 IEEE 802.3u IEEE 1901 |
Frequency | 2MHz~68MHz |
Modulation Schemes | OFDM symbol modulation on line synchronization 1024/ 256/ 64/ 16/ 8-QAM, QPSK, BPSK, ROBO modulation |
Data Rate | TCP: Up to 95 Mbps effective throughput UDP: Up to 95 Mbps effective throughput Powerline: 500Mbps (PHY rate) |
Operating Range | Up to 300 meters over a home's electrical circuit |
QoS | 4 levels priority based contention access, and multi segment bursting 8 levels VLAN priority field, TOS field QoS classification by destination MAC address and IP port |
Nodes | Up to 15 slaves with 1 master, 16 total devices Max 8 bridged devices per station |
IGMP | Support for IPv4/IGMPv1,v2,v3 snooping Support for IPv6 and MLDv1, v2 snooping |
Security | 128-bit AES link encryption with key management WEP/WPA/WPA encryption for wireless |
Wireless Frequency & Modulation | 2400–2483.5MHz 802.11b: CCK, DQPSK, DBPSK 802.11g: 64QAM, 16QAM, QPSK, BPSK, DSSS 802.11n: 64QAM, 16QAM, QPSK, BPSK |
Wireless Output Power | 11n: HT20
11b: 1M: 17dB, 11M: 17dB |
Wireless Features | Support auto channeling 20MHz/40MHz Bandwidth Support 64/128-bit WEP, WPA, and WPA2 for wireless security |
OTHERS | |
Certification | CE, RoHS |
Environmental Condition |
|
SPECIFICATIONS (HP-5102)
HARDWARE | |
Interface | 1 x AC plug (EU, UK, US or AU) 1 x RJ45 10/100Mbps LAN port |
LED Indicator | Power, Ethernet, Powerline |
Button | 1 x Group/ Reset button |
Memory | 1MB Flash 8MB SDRAM |
Power Source | 100-240V AC, 50-60Hz |
Power Consumption | 4W |
Dimensions | 67 x 50 x 32mm |
Weight | 109g |
NETWORK & SYSTEM | |
Standards | IEEE 1901 IEEE 802.3 IEEE 802.3u |
Frequency | 2MHz~68MHz (with Mask) |
Modulation Schemes | OFDM symbol modulation on line synchronization 1024/ 256/ 64/ 16/ 8-QAM, QPSK, BPSK, ROBO modulation |
Data Rate | TCP: Up to 95 Mbps effective throughput UDP: Up to 95 Mbps effective throughput Powerline: 500Mbps (PHY rate) |
Operating Range | Up to 300 meters over a home's electrical circuit |
QoS | 4 levels priority based contention access, and multi segment bursting 8 levels VLAN priority field, TOS field QoS classification by destination MAC address and IP port |
Nodes | Up to 15 slaves with 1 master, 16 total devices Max 8 bridged devices per station |
IGMP | Support for IPv4/IGMPv1,v2,v3 snooping Support for IPv6 and MLDv1, v2 snooping Max 16 source addresses and group members |
Security | 128-bit AES link encryption with key management |
OTHERS | |
Certification | CE, FCC LVD |
Environmental Condition |
|
*500Mbps is the maximum theoretical communication speed at the physical layer via electric power lines.
**Powerline adapters must be deployed in sets of two or more.
PACKAGE CONTENTS
- Powerline adapter x 2 (HP-5102Wn x 1 & HP-5102x 1)
- Quick installation guide x 1
- CD with setup wizard, user manual & multi-language QIG x 1
- Ethernet cable x 2
HARDWARE INTERFACE